Table of Contents
Advertisement
Configure NTP
the system to make it effective.
return
save
reboot
Configure NTP
Network Transport Protocol (NTP) must be configured on the switch.
Procedure
1 From system-view, run the following commands:
clock protocol none
return
clock datetime 13:28:00 02/17/2016
system-view
ntp-service unicast-server <<mgmt_net_ntp1>> priority
clock protocol ntp
save
Configure the VLANs Needed
To create the necessary VLANs, perform this procedure on both switches.
Procedure
1 From system-view, run the following commands:
vlan <<mgmt_net_vlan>>
name MGMT-VLAN
quit
vlan <<deployment_net_vlan>>
name Native-Deployment-VLAN
quit
vlan <<mgmt_vmotion_net_vlan>>
name MGMT-vMotion-VLAN
quit
vlan <<mgmt_ft_net_vlan>>
name MGMT-FT-VLAN
quit
vlan <<compute_vmotion_net_vlan>>
name Compute-vMotion-VLAN
quit
vlan <<compute_ft_net_vlan>>
name Compute-FT-VLAN
quit
©
Copyright
2017 by Nimble Storage, Inc. All rights reserved.
Documentation Feedback
30
Advertisement
Table of Contents
