Configuring Ntp Servers; Configuring Hp Insight Remote Support On Storeall Systems - HP StoreAll 9730 Administrator's Manual

Port
137/udp
138/udp
139/tcp
445/tcp
9000:9002/tcp
9000:9200/udp
20/tcp, 20/udp
21/tcp, 21/udp
7777/tcp
8080/tcp
5555/tcp, 5555/udp
631/tcp, 631/udp
1344/tcp, 1344/udp

Configuring NTP servers

When the cluster is initially set up, primary and secondary NTP servers are configured to provide
time synchronization with an external time source. The list of NTP servers is stored in the Fusion
Manager configuration. The active Fusion Manager node synchronizes its time with the external
source. The other file serving nodes synchronize their time with the active Fusion Manager node.
In the absence of an external time source, the local hardware clock on the agile Fusion Manager
node is used as the time source. This configuration method ensures that the time is synchronized
on all cluster nodes, even in the absence of an external time source.
On StoreAll clients, the time is not synchronized with the cluster nodes. You will need to configure
NTP servers on StoreAll clients.
List the currently configured NTP servers:
ibrix_clusterconfig -i -N
Specify a new list of NTP servers:
ibrix_clusterconfig -c -N SERVER1[,...,SERVERn]

Configuring HP Insight Remote Support on StoreAll systems

IMPORTANT:
changed from 5061 to 161. This port number cannot be changed.
36 Getting started
Description
Between file serving nodes and SMB clients (user network)
Between file serving nodes and StoreAll clients (user network)
Between file serving nodes and FTP clients (user network)
Between GUI and clients that need to access the GUI
Dataprotector
Internet Printing Protocol (IPP)
ICAP
In the StoreAll software 6.1 release, the default port for the StoreAll SNMP agent