Local Logging - Advantech EKI-7428G Series User Manual

The following table describes the items in the previous figure.
Table 4-105. Diagnostics > System Log > Logging Service
Item
Logging Service
Apply
The ensuing table for Logging Information settings are informational only: Logging
Service.

Local Logging

The Local Logging page allows you to designate a local target when the severity criteria is
reached.
To access this page, click Diagnostics > System Log > Local Logging.
Figure 4-108. Diagnostics > System Log > Local Logging
The following table describes the items in the previous figure.
Table 4-106. Diagnostics > System Log > Local Logging
Item
Target
Severity
Apply
Click Enabled or Disabled to set the Logging Service status.
Click Apply to save the values and update the screen.
Enter the local logging target.
Click the drop-down menu to select the severity level for local log
messages.
The level options are:
emerg: Indicates system is unusable. It is the highest level of severity

alert: Indicates action must be taken immediately

crit: Indicates critical conditions

error: Indicates error conditions

warning: Indicates warning conditions

notice: Indicates normal but significant conditions

info: Indicates informational messages

debug: Indicates debug-level messages

Click Apply to save the values and update the screen.
Description
Description
M S
ANAGING WITCH
136