Advantech EKI-7428G Series User Manual page 85

MST Instance Priority Settings
The MST Instance Priority Settings allows you to specify the MST instance and the bridge
priority in that instance.
To access this page, click L2 Switching > Spanning Tree > MST Instance Priority Set-
tings.
Figure 4-44. L2 Switching > Spanning Tree > MST Instance Priority Settings
The following table describes the items in the previous figure.
Table 4-42. L2 Switching > Spanning Tree > MST Instance Priority Settings
Item
MSTI ID
Priority
Apply
The ensuing table for MST Instance Priority Information settings are informational only:
MSTI ID, Priority and Action.
MST Instance Info
To access this page, click L2 Switching > Spanning Tree > MST Instance Info.
The ensuing table for STP Bridge Status settings are informational only: Bridge Identifier,
Designated Root Bridge, Root Path Cost, Designated Bridge, Root Port and TCNLast
Topology Change.
The ensuing table for STP Port Status settings are informational only: Port, Identifier
(Priority / Port Id), Path Cost Conf/Oper, Designated Root Bridge, Root Path Cost,
Designated Bridge, Edge Port Conf/Oper, P2P MAC Conf/Oper, Port Role and Port State.
STP Statistics
To access this page, click L2 Switching > Spanning Tree > STP Statistics.
The ensuing table for STP Statistics settings are informational only: Port, Configuration
BPDUs Received, TCN BPDUs Received, Configuration BPDUs Transmitted and TCN
BPDUs Transmitted.
Click the drop-down menu to specify the MST instance.
Click the drop-down menu set the bridge priority in the specified MST
instance
Click Apply to save the values and update the screen.
Description
M S
ANAGING WITCH
72