System Log Server - Advantech EKI-7428G Series User Manual

M S
ANAGING WITCH
The ensuing table for Local Logging Settings Status settings are informational only:
Status, Target, Severity and Delete (click to delete the desired target).

System Log Server

The System Log Server page allows you to configure the log server.
To access this page, click Diagnostics > System Log > System Log Server.
Figure 4-109. Diagnostics > System Log > System Log Server
The following table describes the items in the previous figure.
Table 4-107. Diagnostics > System Log > System Log Server
Item
Server Address
Server Port
Severity
Facility
Apply
The ensuing table for Remote Logging Setting Status settings are informational only:
Status, Server Info, Severity, Facility and Delete (click to delete the desired server address).
137
Enter the IP address of the log server.
Enter the Udp port number of the log server.
Click the drop-down menu to select the severity level for local log
messages. The default is emerg.
The level options are:
emerg: Indicates system is unusable. It is the highest level of severity

alert: Indicates action must be taken immediately

crit: Indicates critical conditions

error: Indicates error conditions

warning: Indicates warning conditions

notice: Indicates normal but significant conditions

info: Indicates informational messages

debug: Indicates debug-level messages

Click the drop-down menu to select facility to which the message refers.
Click Apply to save the values and update the screen.
Description