Advantech EKI-7428G Series User Manual page 6

Federal Communication Commission Interference
Statement
For further certification information, please go to www.advantech.com
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications when shielded cables
are used for external wiring. We recommend the use of shielded cables. This kind of cable is
available from Advantech. Please contact your local supplier for ordering information.
This product has passed the CE test for environmental specifications. Test conditions for
passing included the equipment being operated within an industrial enclosure. In order to
protect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage,
we strongly recommend the use of CE-compliant industrial enclosure products.
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference when the equipment is operated in a commer-
cial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Safety Instructions
Read these safety instructions carefully.

Keep this user manual for later reference.

Disconnect this equipment from any AC outlet before cleaning. Use damp cloth. Do not

use liquid or spray detergents for cleaning.
For plug-in equipment, the power outlet socket must be located near the equipment and

must be easily accessible.
Keep this equipment away from humidity.

Put this equipment on a reliable surface during installation. Dropping it or letting it fall

may cause damage.
The openings on the enclosure are fo air convection. Protect the equipment from over-

heating. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source is correct before connecting the equipment

to the power outlet.
Position the power cord so that people cannot step on it. Do not place anything over the

power cord.
v