Poe Port Settings - Advantech EKI-7428G Series User Manual

M S
ANAGING WITCH

PoE Port Settings

The PoE Port Settings page allows you to configure the port status, its power limitations,
legacy mode status, and power limit settings.
To access this page, click Management > Power Over Ethernet > PoE Port Settings.
Figure 4-90. Management > Power Over Ethernet > PoE Port Settings
The following table describes the items in the previous figure.
Table 4-88. Management > Power Over Ethernet > PoE Port Settings
Item
Port
Enabled
Power Limit From
Classification
Legacy Mode
Priority
Power Limit
Apply
The ensuing table for PoE Information settings are informational only: Port, Enable State,
Power Limit From Classification, Priority, Legacy and Power Limit (W).
117
Click the drop-down menu to select a PoE port.
Select Enabled or Disabled to designate the PoE port function by ports.
Select Enabled or Disabled to designate the power limit classification.
Select Enabled or Disabled to designate the legacy mode option for the
port.
Click the drop-down menu to configure the power supply priority: Critical,
Low, Medium or High. Default is Low.
Enter a number to set the port power current limitation to be given to the
Powered Device (PD)
Click Apply to save the values and update the screen.
Description