Advantech EKI-7428G Series User Manual page 119

Egress Bandwidth Control
The Egress Bandwidth Control page allows you to set the egress bandwidth control for a
listed port.
To access this page, click QoS > Rate Limit > Egress Bandwidth Control.
Figure 4-78. QoS > Rate Limit > Egress Bandwidth Control
The following table describes the items in the previous figure.
Table 4-76. QoS > Rate Limit > Egress Bandwidth Control
Item
Port
State
Rate (Kbps)
Apply
The ensuing table for Egress Bandwidth Control Status settings are informational only:
Port and Egress Rate Limit (Kbps).
Enter the port number to set the Egress Bandwidth Control.
Select Disabled or Enabled to set the Egress Bandwidth Control state.
Enter the value in Kbps (16 to 1000000) to set the Egress Bandwidth rate.
Click Apply to save the values and update the screen.
Description
M S
ANAGING WITCH
106