Advantech EKI-7428G Series User Manual page 126

M S
ANAGING WITCH
SNMP Community
The SNMP Community page provides configuration options for the community.
SNMP v1 and SNMP v2c use the group name (Community Name) certification. It's role is
similar to the password function. If SNMP v1 and SNMP v2c are used, you can go directly
from the configuration settings to this page to configure the SNMP community.
To access this page, click Management > SNMP > SNMP Community.
Figure 4-86. Management > SNMP > SNMP Community
The following table describes the items in the previous figure.
Table 4-84. Management > SNMP > SNMP Community
Item
Community Name
Access Right
Apply
The ensuing table for Community Status settings are informational only: No., Community
Name, Access Right and Delete (click to delete the desired community name).
113
Enter a community name (up to 20 characters).
Click the radio box to specify the access level (read only or read write)
Click Apply to save the values and update the screen.
Description