Advantech EKI-7428G Series User Manual page 83

MST Config Identification
The MST Config Identification page allows you to configure the identification setting name
and the identification range.
To access this page, click L2 Switching > Spanning Tree > MST Config Identification.
Figure 4-42. L2 Switching > Spanning Tree > MST Config Identification
The following table describes the items in the previous figure.
Table 4-40. L2 Switching > Spanning Tree > MST Config Identification
Item
Configuration Name
Revision Level
Apply
The ensuing table for MST Configuration Identification Information settings are
informational only: Configuration Name and Revision Level.
Enter the identifier used to identify the configuration currently being used. It
may be up to 32 characters.
Enter the identifier for the Revision Configuration, range: 0 to 65535
(default: 0).
Click Apply to save the values and update the screen.
Description
M S
ANAGING WITCH
70