Advantech EKI-7428G Series User Manual page 120

M S
ANAGING WITCH
Egress Queue
The Egress Queue page allows you to set the egress bandwidth parameters.
To access this page, click QoS > Rate Limit > Egress Queue.
The following table describes the items in the previous figure.
Table 4-77. QoS > Rate Limit > Egress Queue
Item
Port
Queue
State
CIR (Kbps)
Apply
The ensuing table for FE1 Egress Per Queue Status settings are informational only:
Queue Id and Egress Rate Limit (Kbps).
107
Figure 4-79. QoS > Rate Limit > Egress Queue
Click the drop-down menu to select the port to define the Egress queue.
Click the drop-down menu to set the queue order for the Egress setting.
Click Disabled or Enabled to set the Egress queue state.
Enter the value in Kbps (16 to 1000000) to set the CIR rate for the Egress
queue.
Click Apply to save the values and update the screen.
Description