Httpfeedback Commands - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80
Contents Introduction

HttpFeedback commands

xCommand HttpFeedback Deregister
Deregister XML feedback over HTTP(S).
Requires user role: USER
Parameters:
FeedbackSlot(r): <1..4>
Example:
xCommand HttpFeedback Deregister FeedbackSlot:1
xCommand HttpFeedback Register
Register the system to a HTTP(S) server to return XML feedback over HTTP(S) to specific URLs.
FeedbackSlot: You can have from 1 to 4 slots for feedback.
ServerUrl: Define the URL for the HTTP(S) server.
Expression[1..15]: What parts of the Status and Configuration XML documents to monitor are speci-
fied by XPath expressions. You can have from 1 to 15 XPath expressions.
Requires user role: USER
Parameters:
FeedbackSlot: <1..4>
ServerUrl(r): <S: 1, 2048>
Expression[1..15]: <S: 1, 255>
Example:
xCommand HttpFeedback Register FeedbackSlot:1 ServerUrl:10.47.19.41
Expression[1]:Status/Video Expression[2]:Status/Audio Expression[3]:Status/
Call Expression[4]:Status/Conference
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration
Key commands
xCommand Key Click
xCommand Key Press
xCommand Key Release
113
xCommand xCommand
Not applicable for this product.
Not applicable for this product.
Not applicable for this product.
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.