Cisco TelePresence SX80 Reference Manual page 49

Cisco TelePresence SX80
Contents Introduction
xConfiguration Network [1..1] IPv4 Gateway
Define the IPv4 network gateway. This setting is only applicable when the Network Assignment is
set to Static.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: A valid IPv4 address.
Example: xConfiguration Network 1 IPv4 Gateway: "192.0.2.1"
xConfiguration Network [1..1] IPv4 SubnetMask
Define the IPv4 network subnet mask. This setting is only applicable when the Network Assignment
is set to Static.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: The valid IPv4 address format.
Example: xConfiguration Network 1 IPv4 SubnetMask: "255.255.255.0"
xConfiguration Network [1..1] IPv6 Assignment
Define how the system will obtain its IPv6 address and the default gateway address. This setting
only applies to systems on IPv6 networks.
Requires user role: ADMIN
Value space: <Static/DHCPv6/Autoconf>
Static: The codec and gateway IP addresses must be configured manually using the Network
IPv6 Address and Network IPv6 Gateway settings. The options, for example NTP and DNS server
addresses, must either be set manually or obtained from a DHCPv6 server. The Network IPv6
DHCPOptions setting determines which method to use.
DHCPv6: All IPv6 addresses, including options, will be obtained from a DHCPv6 server. See RFC
3315 for a detailed description. The Network IPv6 DHCPOptions setting will be ignored.
Autoconf: Enable IPv6 stateless autoconfiguration of the IPv6 network interface. See RFC 4862 for
a detailed description. The options, for example NTP and DNS server addresses, must either be
set manually or obtained from a DHCPv6 server. The Network IPv6 DHCPOptions setting deter-
mines which method to use.
Example: xConfiguration Network 1 IPv6 Assignment: Autoconf
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration xConfiguration
xConfiguration Network [1..1] IPv6 Address
xConfiguration Network [1..1] IPv6 Gateway
xConfiguration Network [1..1] IPv6 DHCPOptions
49
xCommand
Enter the static IPv6 network address for the system. This setting is only applicable when the
Network IPv6 Assignment is set to Static.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: A valid IPv6 address.
Example: xConfiguration Network 1 IPv6 Address: "2001:0DB8:0000:0000:0000:0000:0000:000
2"
Define the IPv6 network gateway address. This setting is only applicable when the Network IPv6
Assignment is set to Static.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: A valid IPv6 address.
Example: xConfiguration Network 1 IPv6 Gateway: "2001:0DB8:0000:0000:0000:0000:0000:000
1"
Retrieve a set of DHCP options, for example NTP and DNS server addresses, from a DHCPv6
server.
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable the retrieval of DHCP options from a DHCPv6 server.
On: Enable the retrieval of a selected set of DHCP options from a DHCPv6 server.
Example: xConfiguration Network 1 IPv6 DHCPOptions: On
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.