Xstatus Camera [N] Position Zoom; Xstatus Camera [N] Position Focus; Xstatus Camera [N] Capabilities Options; Xstatus Camera [N] Flip - Cisco TelePresence SX80 Reference Manual

Application programmer interface (api)
Hide thumbs Also See for TelePresence SX80:
Table of Contents

Advertisement

Cisco TelePresence SX80
Contents
Introduction

xStatus Camera [n] Position Zoom

Shows the current zoom (zoom in and out) position of the camera. The value range depends on
camera type.
Value space of the result returned:
<0..65535>
Example:
xStatus Camera 1 Position Zoom
*s Camera 1 Position Zoom: 828
** end

xStatus Camera [n] Position Focus

Shows the current focus position of the camera. The value range depends on camera type.
Value space of the result returned:
<0..65535>
Example:
xStatus Camera 1 Position Focus
*s Camera 1 Position Focus: 4597
** end

xStatus Camera [n] Capabilities Options

Shows the camera capabilities (ptzf = pan, tilt, zoom, focus).
Value space of the result returned:
<String>
Example:
xStatus Camera 1 Capabilities Options
*s Camera 1 Capabilities Options: "ptzf"
** end

xStatus Camera [n] Flip

In Flip mode (vertical flip) the image can be flipped upside down.
Value space of the result returned:
<"Auto"/"On"/"Off">
Example:
xStatus Camera 1 Flip
*s Camera 1 Flip: "Off"
** end
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API
xConfiguration

xStatus Camera [n] UpgradeStatus

xStatus Camera [n] DownloadProgress

159
xCommand
Returns the status of the camera software upgrade.
None: No upgrade going on at the moment.
Downloading: Downloading the upgrade.
Installing: Installing the upgrade.
Rebooting: Rebooting the system to take the upgrade in use.
Value space of the result returned:
<None/Downloading/Installing/Rebooting>
Example:
xStatus Camera 1 UpgradeStatus
*s Camera 1 UpgradeStatus: None
** end
Indicates how many percent of the new camera software upgrade has been downloaded. Result -1
indicates that the information is not available for that camera type.
Value space of the result returned:
<Integer>
Example:
xStatus Camera 1 DownloadProgress
*s Camera 1 DownloadProgress: 0
** end
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents