Audio Configuration - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80
Contents Introduction

Audio configuration

xConfiguration Audio Input HDMI [1..3] Mode
Determine if the audio channels on the HDMI input shall be enabled. The HDMI input has two audio
channels.
As default, Audio is disabled on HDMI [1..2] and enabled on HDMI [3].
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable audio on the HDMI input.
On: Enable audio on the HDMI input.
Example: xConfiguration Audio Input HDMI 1 Mode: On
xConfiguration Audio Input HDMI [1..3] Level
Define the audio level of the HDMI input connector, in steps of 1 dB.
Requires user role: ADMIN
Value space: <-24..0>
Range: Select a value between -24 and 0, in steps of 1 dB.
Example: xConfiguration Audio Input HDMI 2 Level: 0
xConfiguration Audio Input HDMI [1..3] VideoAssociation VideoInputSource
It is possible to associate an audio source with a video source, and further to determine whether to
play or mute audio depending on whether the video source is presented or not. By default, audio is
not muted.
Use the Audio Input HDMI [n] VideoAssociation VideoInputSource setting to define which video
source to associate the audio source with. Use the Audio Input HDMI [n] VideoAssociation
MuteOnInactiveVideo setting to define whether to play or mute audio when not presenting the video
source.
Requires user role: ADMIN
Value space: <1/2/3/4/5>
Range: Select one of the video input sources.
Example: xConfiguration Audio Input HDMI 3 VideoAssociation VideoInputSource: 1
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration xConfiguration
xConfiguration Audio Input HDMI [1..3] VideoAssociation MuteOnInactiveVideo
xConfiguration Audio Input Line [1..4] Equalizer ID
xConfiguration Audio Input Line [1..4] Equalizer Mode
31
xCommand
It is possible to associate an audio source with a video source, and further to determine whether to
play or mute audio depending on whether the video source is presented or not. By default, audio is
not muted.
Use the Audio Input HDMI [n] VideoAssociation VideoInputSource setting to define which video
source to associate the audio source with. Use the Audio Input HDMI [n] VideoAssociation
MuteOnInactiveVideo setting to define whether to play or mute audio when not presenting the video
source.
Requires user role: ADMIN
Value space: <Off/On>
Off: The audio source is not associated with a video source. The audio will be played locally and to
far end regardless of whether the video source is presented.
On: The audio source is associated with a video source. The audio will be played (locally and to
far end) when the associated video source is presented. The audio will be muted when the video
source is not presented.
Example: xConfiguration Audio Input HDMI 3 VideoAssociation MuteOnInactiveVideo: Off
Select the audio input line equalizer ID.
Requires user role: ADMIN
Value space: <1..8>
Range: Select EqualizerID 1 to 8.
Example: xConfiguration Audio Input Line 1 Equalizer ID: 1
Set the audio input line equalizer mode.
Requires user role: ADMIN
Value space: <Off/On>
Off: No equalizer.
On: Enable the equalizer for the audio input line.
Example: xConfiguration Audio Input Line 1 Equalizer Mode: Off
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.