Cameras Commands - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80
Contents Introduction

Cameras commands

xCommand Cameras SpeakerTrack Activate
Activate SpeakerTrack mode. Requires that xConfiguration Cameras SpeakerTrack Mode is set to
Auto (default).
This setting applies only when using a Cisco TelePresence SpeakerTrack 60 camera.
The SpeakerTrack 60 camera assembly consists of two cameras and uses an audio tracking
technique that finds and captures a close-up of the active speaker. When a change of speaker is
detected, the system can switch automatically between the two cameras to always show the best
camera view.
Requires user role: USER
Example:
xCommand Cameras SpeakerTrack Activate
xCommand Cameras SpeakerTrack Deactivate
Deactivate SpeakerTrack mode.
This setting applies only when using a Cisco TelePresence SpeakerTrack 60 camera.
The SpeakerTrack 60 camera assembly consists of two cameras and uses an audio tracking
technique that finds and captures a close-up of the active speaker. When a change of speaker is
detected, the system can switch automatically between the two cameras to always show the best
camera view.
Requires user role: USER
Example:
xCommand Cameras SpeakerTrack Deactivate
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration
xCommand Cameras SpeakerTrack Whiteboard ActivatePosition
xCommand Cameras SpeakerTrack Whiteboard AlignPosition
107
xCommand xCommand
Moves the specified camera in a SpeakerTrack 60 to the position stored with xCommand Cameras
SpeakerTrack Whiteboard StorePosition.
Camera: Select either right or left camera.
WhiteboardId: The id set for the camera position used for the snap-to-whiteboard feature. Currently
only id 1 can be used.
Requires user role: ADMIN
Parameters:
Camera (r): <Left/Right>
WhiteboardId: <0-65534>
Example:
xCommand Cameras SpeakerTrack Whiteboard ActivatePosition Camera:Left
WhiteboardId:123
Align the position of the other camera on a SpeakerTrack 60 to the first cameras stored position.
You must also set the distance to a whiteboard.
Camera: Select either right or left camera.
Distance: Set distance to whiteboard in millimeters. Use an accurate measurement for the feature to
work seamlessly.
Requires user role: ADMIN
Parameters:
Camera (r): <Left/Right>
Distance (r): <3000-15000>
Example:
xCommand Cameras SpeakerTrack Whiteboard AlignPosition Camera:Left
Distance:8000
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.