Cisco TelePresence SX80 Reference Manual page 95

Cisco TelePresence SX80
Contents Introduction
xCommand Audio RemoteOutput UpdateInputGain
Update the gain of a local or remote input connected to a remote output.
This command is mainly intended for internal use by the TC console. TC console automatically
generates a start-up script that makes the command persistent over a reboot. To use this command
outside of TC console, you have to include it in a start-up script in order to make the setting persis-
tent over a reboot. For more information on star-up scripts and TC console see the administrator
guide for your codec.
OutputId: A unique identifier for the local output.
InputId: A unique identifier for the local or remote input.
InputGain: Set a gain on the input signal in the range from -54dB to 15dB. The value -54dB equals
Off.
Requires user role: ADMIN
Parameters:
OutputId(r): <0..65534>
InputId(r): <0..65534>
InputGain: <-54..15>
Example:
xCommand Audio RemoteOutput UpdateInputGain OutputId:6 InputId:3
xCommand Audio Setup Clear
Remove all local inputs and local outputs.
Requires user role: ADMIN
Example:
xCommand Audio Setup Clear
xCommand Audio Sound Play
Play a specified audio sound.
Requires user role: USER
Parameters:
Sound(r): <Bump/Busy/CallDisconnect/CallInitiate/CallWaiting/Dial/KeyInput/KeyTone/Nav/
NavBack/Notification/OK/PresentationConnect/Ringing/SpecialInfo/TelephoneCall/VideoCall/
Volume>
Loop: <On/Off>
Example:
xCommand Audio Sound Play Sound: Ringing
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration
xCommand Audio Sound Stop
xCommand Audio SoundsAndAlerts Ringtone List
xCommand Audio SoundsAndAlerts Ringtone Play
95
xCommand xCommand
Stop playing audio sound.
Requires user role: USER
Example:
xCommand Audio Sound Stop
Lists all available ringtones that can be configured using xConfiguration Audio SoundsAndAlerts
RingTone.
Requires user role: USER
Example:
xCommand Audio SoundsAndAlerts Ringtone List
*r AudioRingtoneListResult Ringtone 1 Id: "Sunrise"
*r AudioRingtoneListResult Ringtone 2 Id: "Mischief"
*r AudioRingtoneListResult Ringtone 3 Id: "Ripples"
*r AudioRingtoneListResult Ringtone 4 Id: "Reflections"
*r AudioRingtoneListResult Ringtone 5 Id: "Vibes"
*r AudioRingtoneListResult Ringtone 6 Id: "Delight"
*r AudioRingtoneListResult Ringtone 7 Id: "Evolve"
*r AudioRingtoneListResult Ringtone 8 Id: "Playful"
*r AudioRingtoneListResult Ringtone 9 Id: "Ascent"
*r AudioRingtoneListResult Ringtone 10 Id: "Calculation"
*r AudioRingtoneListResult Ringtone 11 Id: "Mellow"
*r AudioRingtoneListResult Ringtone 12 Id: "Ringer"
Play one of the available ringtones. To get a list of the available ringtones use the command
xCommand Audio SoundsAndAlerts Ringtone List.
Requires user role: USER
Parameters:
RingTone(r): <S: 1, 100>
Example:
xCommand Audio SoundsAndAlerts Ringtone Play RingTone: Sunrise
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.