Xstatus Video Output Connector [N] Resolution Refreshrate; Xstatus Video Output Connector [N] Type; Xstatus Video Output Dvi Connecteddevice Name; Xstatus Video Output Dvi Connecteddevice Preferredformat - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80
Contents Introduction

xStatus Video Output Connector [n] Resolution RefreshRate

Shows the resolution refresh rate (Hz) for the video output connector.
Value space of the result returned:
<1..300>
Example:
xStatus Video Output Connector 1 Resolution RefreshRate
*s Video Output Connector 1 Resolution RefreshRate: 60
** end

xStatus Video Output Connector [n] Type

Shows the type of connector.
HDMI: It is an HDMI connector.
DVI: It is an DVI connector.
Value space of the result returned:
<HDMI/DVI>
Example:
xStatus Video Output Connector 1 Type
*s Video Output Connector 1 Type: HDMI
** end

xStatus Video Output DVI ConnectedDevice Name

Shows the name of the monitor connected to the DVI port as defined in the monitors EDID.
Value space of the result returned:
<String>
Example:
xStatus Video Output DVI ConnectedDevice Name
*s Video Output DVI 2 ConnectedDevice Name: ""
*s Video Output DVI 4 ConnectedDevice Name: ""
** end
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration

xStatus Video Output DVI ConnectedDevice PreferredFormat

xStatus Video Output HDMI ConnectedDevice Name

xStatus Video Output HDMI ConnectedDevice PreferredFormat

219
xCommand
Shows the preferred input format of the monitor connected to the DVI port as defined in the
monitors EDID. This is not necessarily the format the codec is sending out.
Value space of the result returned:
<String>
Example:
xStatus Video Output DVI ConnectedDevice PreferredFormat
*s Video Output DVI 2 ConnectedDevice PreferredFormat: ""
** end
Shows the name of the monitor connected to the HDMI port as defined in the monitors EDID.
Value space of the result returned:
<String>
Example:
xStatus Video Output HDMI ConnectedDevice Name
*s Video Output HDMI 1 ConnectedDevice Name: ""
*s Video Output HDMI 3 ConnectedDevice Name: ""
** end
Shows the preferred input format of the monitor connected to the HDMI port as defined in the
monitors EDID. This is not necessarily the format the codec is sending out.
Value space of the result returned:
<String>
Example:
xStatus Video Output HDMI ConnectedDevice PreferredFormat
*s Video Output HDMI 1 ConnectedDevice PreferredFormat: ""
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.