Preset Commands - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80
Contents Introduction

Preset commands

xCommand Preset Activate
Activate one of the stored local presets.
Note that information about all video input sources, and pan, tilt, zoom and focus values for all
cameras are included in the same preset. In contrast, the xCommand Camera Preset commands
applies to individual cameras only.
PresetId: The ID of the preset you want to activate.
Requires user role: USER
Parameters:
PresetId(r): <1..15>
Example:
xCommand Preset Activate PresetId:3
xCommand Preset Clear
Delete a preset.
Note that information about all video input sources, and pan, tilt, zoom and focus values for all
cameras are included in the same preset. In contrast, the xCommand Camera Preset commands
applies to individual cameras only.
PresetId: The ID of the preset you want to delete.
Requires user role: USER
Parameters:
PresetId(r): <1..15>
Example:
xCommand Preset Clear PresetId:3
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration
xCommand Preset Store
124
xCommand xCommand
Store the connector selections for all video input sources and the current position (pan and tilt),
zoom and focus values for all cameras.
Note that information about all video input sources, and pan, tilt, zoom and focus values for all
cameras are included in the same preset. The system may hold 15 such predefined video input
presets. These presets are available for far end control, i.e. they are referred in the PresetId
parameter of the xCommand FarEndControl Preset Activate command. In contrast, the xCommand
Camera Preset commands applies to individual cameras only. Those presets are not available for far
end control.
PresetId: The ID of this preset.
Type: Not applicable. If you want to ensure that a preset only affects camera positions we recom-
mend that you select Camera.
Description: Enter a description of the camera preset.
Requires user role: USER
Parameters:
PresetId(r): <1..15>
Type(r): <All/Camera>
Description: <S: 0, 255>
Example:
xCommand Preset Store PresetId:3 Type:Camera Description:"Left view"
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.