Xstatus Network 1 Vlan Voice Vlanid; Xstatus Network 1 Cdp Platform; Xstatus Network 1 Cdp Version; Xstatus Network 1 Cdp Capabilities - Cisco TelePresence SX80 Reference Manual

Application programmer interface (api)
Hide thumbs Also See for TelePresence SX80:
Table of Contents

Advertisement

Cisco TelePresence SX80
Contents
Introduction

xStatus Network 1 VLAN Voice VlanId

The feedback shows the VLAN Voice ID; or Off if the VLAN Voice Mode is not enabled.
Value space of the result returned:
<"Off"/"1".."4094">
Example:
xStatus Network 1 VLAN Voice VlanId
*s Network 1 VLAN Voice VlanId: "Off"
** end

xStatus Network 1 CDP Platform

Returns the hardware platform name of the switch connected to the endpoint.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Platform
*s Network 1 CDP Platform: "cisco WS-C3750X-48P"
** end

xStatus Network 1 CDP Version

Returns information about the software release version the switch is running.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Version
*s Network 1 CDP Version: "Cisco IOS Software, C3750E Software (C3750E-
UNIVERSALK9-M), Version 15.0(1)SE2, RELEASE SOFTWARE (fc3)*Technical
Support: http://www.cisco.com/techsupport*Copyright (c) 1986-2011 by Cisco
Systems, Inc.*Compiled Thu 22-Dec-11 00:05 by prod _ rel _ team"
** end
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API
xConfiguration

xStatus Network 1 CDP Capabilities

xStatus Network 1 CDP DeviceId

xStatus Network 1 CDP PortID

193
xCommand
Describes the functional capability for the switch in form of a device type. See documentation for
CDP protocol for more information.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Capabilities
*s Network 1 CDP Capabilities: "0x0029"
** end
Identifies the name of the switch in form of a character string.
Value space of the result returned:
<String>
Example:
xStatus Network CDP DeviceId
*s Network 1 CDP DeviceId: "123456.company.com"
** end
Returns the identification the switch uses of the port the endpoint is connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP PortID
*s Network 1 CDP PortID: "GigabitEthernet1/0/23"
** end
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents