Userinterface Commands - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80
Contents Introduction
xCommand SystemUnit OptionKey RemoveAll
Remove all Option keys.
Requires user role: ADMIN
Parameters:
Confirm(r): <Yes>
Example:
xCommand SystemUnit OptionKey RemoveAll Confirm: Yes
xCommand SystemUnit SoftwareUpgrade
Initiate a software upgrade by fetching the software on a given URL. If the server requires username
and password these parameters must be included.
Requires user role: ADMIN
Parameters:
URL(r): <S: 0, 255>
UserName: <S: 0, 255>
Password: <S: 0, 255>
Example:
xCommand SystemUnit SoftwareUpgrade URL: "ftp://<ftp _ server _ ip _
address>/s52000tc4 _ 0 _ 0.pkg" UserName: testDownload Password: 1234
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration

UserInterface commands

xCommand UserInterface OSD Close
xCommand UserInterface ScreenShot Get
xCommand UserInterface ScreenShot List
xCommand UserInterface ScreenShot Remove
130
xCommand xCommand
Clear all messages and indicators from the monitor(s).
Requires user role: USER
Parameters:
Element(r): <Menu>
Example:
xCommand UserInterface OSD Close Element: Menu
For internal use only.
Requires user role: ADMIN
Parameters:
ScreenShotId(r): <S: 0, 50>
Example:
xCommand UserInterface ScreenShot Get ScreenShotId:5
For internal use only.
Requires user role: ADMIN
Example:
xCommand UserInterface ScreenShot List
For internal use only.
Requires user role: ADMIN
Parameters:
ScreenShotId(r): <S: 0-50>
Example:
xCommand UserInterface ScreenShot Remove ScreenShotId:5
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.