Facilityservice Configuration - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80
Contents Introduction

FacilityService configuration

xConfiguration FacilityService Service [1..5] Type
Up to five different facility services can be supported simultaneously. With this setting you
can select what kind of services they are. A facility service is not available unless both the
FacilityService Service Name and the FacilityService Service Number settings are properly set.
Only FacilityService Service 1 with Type Helpdesk is available on the Touch controller; the other
options are available for system integrators using the API (Application Programming Interface)
command set.
Requires user role: ADMIN
Value space: <Other/Concierge/Helpdesk/Emergency/Security/Catering/Transportation>
Other: Select this option for services not covered by the other options.
Concierge: Select this option for concierge services.
Helpdesk: Select this option for helpdesk services.
Emergency: Select this option for emergency services.
Security: Select this option for security services.
Catering: Select this option for catering services.
Transportation: Select this option for transportation services.
Example: xConfiguration FacilityService Service 1 Type: Helpdesk
xConfiguration FacilityService Service [1..5] Name
Enter the name of the facility service. Up to five different facility services are supported. A facil-
ity service is not available unless both the FacilityService Service Name and the FacilityService
Service Number settings are properly set. Only FacilityService Service 1 is available on the Touch
controller. The name will show on the facility service call button, which appears when you tap the
question mark icon in the top bar. The other services are available for system integrators using the
API (Application Programming Interface) command set.
Requires user role: ADMIN
Value space: <S: 0, 1024>
Format: String with a maximum of 1024 characters.
Example: xConfiguration FacilityService Service 1 Name: ""
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration xConfiguration
xConfiguration FacilityService Service [1..5] Number
xConfiguration FacilityService Service [1..5] CallType
44
xCommand
Enter the number (URI or phone number) of the facility service. Up to five different facility services
are supported. A facility service is not available unless both the FacilityService Service Name and
the FacilityService Service Number settings are properly set. Only FacilityService Service 1 is
available on the Touch controller; the other options are available for system integrators using the API
(Application Programming Interface) command set.
Requires user role: ADMIN
Value space: <S: 0, 1024>
Format: String with a maximum of 1024 characters.
Example: xConfiguration FacilityService Service 1 Number: ""
Set the call type for each facility service. Up to five different facility services are supported. A
facility service is not available unless both the FacilityService Service Name and the FacilityService
Service Number settings are properly set. Only FacilityService Service 1 is available on the
Touch controller; the other options are available for system integrators using the API (Application
Programming Interface) command set.
Requires user role: ADMIN
Value space: <Video/Audio>
Video: Select this option for video calls.
Audio: Select this option for audio calls.
Example: xConfiguration FacilityService Service 1 CallType: Video
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.