Gpio Commands; Xcommand Gpio Manualstate Set; Httpfeedback Commands; Xcommand Httpfeedback Deregister - Cisco TelePresence MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

GPIO commands

xCommand GPIO ManualState Set

Requires user role: USER
USAGE:
xCommand GPIO ManualState Set [Pin1: Pin1] [Pin2: Pin2] [Pin3: Pin3] [Pin4: Pin4]
where
Pin1: High/Low
Pin2: High/Low
Pin3: High/Low
Pin4: High/Low
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
D15335.02
About the API xConfiguration xCommand xCommand

HttpFeedback commands

xCommand HttpFeedback Deregister

Deregister XML feedback over HTTP(S).
Requires user role: ADMIN
USAGE:
xCommand HttpFeedback Deregister FeedbackSlot:
where
FeedbackSlot: Integer (1..4)
You can have from 1 to 4 slots for feedback.

xCommand HttpFeedback Register

Register the system to a HTTP(S) server to return XML feedback over HTTP(S) to specific URLs.
Requires user role: ADMIN
USAGE:
xCommand HttpFeedback Register [FeedbackSlot: FeedbackSlot] ServerUrl:
"ServerUrl" [Expression[1..15]: "Expression[1..15]"]
where
FeedbackSlot: Integer (1..4)
You can have from 1 to 4 slots for feedback.
ServerUrl: String (1, 2048)
Define the URL for the HTTP(S) server.
Expression[1..15]: String (1, 255)
XPath expressions specify which parts of the Status and Configuration XML documents
are monitored. You can have from 1 to 15 XPath expressions.
108
API Reference Guide
xStatus Appendices
FeedbackSlot
Copyright © 2016 Cisco Systems, Inc. All rights reserved.