H323 Status - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80
Contents Introduction

H323 status

xStatus H323
Shows the top level overview of the H323 status.
xStatus H323 Gatekeeper Status
Shows the gatekeeper registration status.
Value space of the result returned:
<Required/Discovering/Discovered/Authenticating/Authenticated/Registering/Registered/
Inactive/Rejected>
Example:
xStatus H323 Gatekeeper Status
*s H323 Gatekeeper Status: Registered
** end
xStatus H323 Gatekeeper Address
Displays the IP address of the gatekeeper where the system is registered.
Value space of the result returned:
<String>
Example:
xStatus H323 Gatekeeper Address
*s H323 Gatekeeper Address: "192.0.1.20"
** end
xStatus H323 Gatekeeper Port
Shows the port which is used when connecting to on the gatekeeper.
Value space of the result returned:
<Integer>
Example:
xStatus H323 Gatekeeper Port
*s H323 Gatekeeper Port: 1719
** end
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration
xStatus H323 Gatekeeper Reason
xStatus H323 Mode Status
174
xCommand
Shows the reason for rejected registration.
Value space of the result returned:
<String>
Example:
xStatus H323 Gatekeeper Reason
*s H323 Gatekeeper Reason: ""
** end
Shows the status for H.323 registration.
Enabled: Registration is enabled.
Disabled: Registration ifs disable, because SIP is enabled.
NotAvailable: Status is not available.
Value space of the result returned:
<String>
Example:
xStatus H323 Mode Status
*s H323 Mode Status: "Disabled"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.