Cisco TelePresence SX80
Contents
Introduction
xStatus Conference DoNotDisturb
Shows whether DoNotDisturb mode is switched on or not.
Value space of the result returned:
<Active/Inactive>
Example:
xStatus Conference DoNotDisturb
*s Conference DoNotDisturb: Inactive
** end
xStatus Conference ActiveSpeaker Mode
Shows whether the ActiveSpeaker mode is switched on or not.
Value space of the result returned:
<On/Off>
Example:
xStatus Conference ActiveSpeaker Mode
*s Conference ActiveSpeaker Mode: Off
** end
xStatus Conference ActiveSpeaker SiteId
Shows the SiteId (CallId) of the current active speaker.
Value space of the result returned:
<Integer>
Example:
xStatus Conference ActiveSpeaker SiteId
*s Conference ActiveSpeaker SiteId: 0
** end
xStatus Conference ActiveSpeaker Manual SiteId
Shows the SiteId (CallId) for the participant locked as the active speaker in the conference.
Value space of the result returned:
<Integer>
Example:
xStatus Conference ActiveSpeaker Manual SiteId
*s Conference ActiveSpeaker Manual SiteId: 0
** end
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API
xConfiguration
xStatus Conference SelectedCallProtocol
167
xCommand
Indicates which call protocol is used as default.
Value space of the result returned:
<H323/SIP/H320>
Example:
xStatus Conference SelectedCallProtocol
*s Conference SelectedCallProtocol: SIP
** end
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.