Cisco TelePresence SX80 Reference Manual page 129

Cisco TelePresence SX80
Contents Introduction
xCommand SystemUnit DateTime Set
Set the date and time for the system, if not available from NTP (Network Time Protocol).
Requires user role: ADMIN
Parameters:
Year: <2008..2037>
Month: <1..12>
Day: <1..31>
Hour: <0..23>
Minute: <0..59>
Second: <0..59>
Example:
xCommand SystemUnit DateTime Set Year:2012 Month:7 Day:3 Hour:12 Minute:0
Second:0
xCommand SystemUnit Diagnostics Run
This command runs all self-diagnostics commands on the system.
Requires user role: ADMIN
Parameters:
ResultSet: <Alerts/All/None>
Example:
xCommand SystemUnit Diagnostics Run
xCommand SystemUnit FactoryReset
Reset the codec to factory default settings. The call logs are deleted and all system parameters are
reset to default values. All files that have been uploaded to the codec are deleted. Option key(s) are
not affected.
As a default the system restarts after the factory reset, but other behavior can be forced by select-
ing a different TrailingAction.
TrailingAction: Select Shutdown or NoAction to override the default behavior (Restart).
Requires user role: ADMIN
Parameters:
Confirm(r): <Yes>
TrailingAction: <NoAction/Restart/Shutdown>
Example:
xCommand SystemUnit FactoryReset Confirm: Yes
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration
xCommand SystemUnit Notifications RemoveAll
xCommand SystemUnit OptionKey Add
xCommand SystemUnit OptionKey List
xCommand SystemUnit OptionKey Remove
129
xCommand xCommand
Clears the list of system notifications that are reported by xStatus SystemUnit Notifications Text/
Type.
Requires user role: ADMIN
Example:
xCommand SystemUnit Notifications RemoveAll
Add an option key to support additional features.
Requires user role: ADMIN
Parameters:
Key(r): <S: 16, 24>
Example:
xCommand SystemUnit OptionKey Add Key:******************
List all option keys that have been added to the system. Added in TC7.3.3.
Requires user role: ADMIN
Example:
xCommand SystemUnit OptionKey List
Remove an individual Option key. Added in TC7.3.3.
Requires user role: ADMIN
Parameters:
Type(r): <Encryption/MultiSite/PremiumResolution/RemoteMonitoring>
Example:
xCommand SystemUnit OptionKey Remove Type: PremiumResolution
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.