Bookings Commands - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80
Contents Introduction
xCommand Audio VUMeter Stop
Stop collecting VU meter information for the connector identified by the ConnectorId and
ConnectorType parameters. Together these parameters uniquely identify the connector.
ConnectorId: The connector identifier is printed on the codec connector panel.
ConnectorType: Identifies whether it is an HDMI input connector, an audio line input connector or a
microphone connector.
Requires user role: USER
Parameters:
ConnectorType(r): <HDMI/Line/Microphone>
ConnectorId(r): <1..8>
Example:
xCommand Audio VUMeter Stop ConnectorType: Microphone ConnectorId: 1
xCommand Audio VUMeter StopAll
Stop collecting VU meter information for all connectors.
Requires user role: USER
Example:
xCommand Audio VUMeter StopAll
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration

Bookings commands

xCommand Bookings Clear
97
xCommand xCommand
Clear the current stored list of bookings.
Requires user role: USER
Example:
xCommand Bookings Clear
API Reference Guide
xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.