Xcommand Systemunit Firsttimewizard Stop; Xcommand Systemunit Notifications Removeall; Xcommand Systemunit Optionkey Add; Xcommand Systemunit Optionkey List - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction
Provisioning:
xConfiguration Provisioning Mode
SerialPort:
xConfiguration SerialPort Mode
xConfiguration SerialPort BaudRate
xConfiguration SerialPort LoginRequired
Certificates:
Not supported in this software version.
TrailingAction
: NoAction/Restart/Shutdown
Select Shutdown or NoAction to override the default behaviour (Restart). The default is
set to Restart

xCommand SystemUnit FirstTimeWizard Stop

Stops the wizard which appears the first time you start the system, so the system can be set up
without it. The wizard only appears again if the system is reset to its factory default settings.
Requires user role: ADMIN, INTEGRATOR, USER
USAGE:
xCommand SystemUnit FirstTimeWizard Stop

xCommand SystemUnit Notifications RemoveAll

Clears the list of system notifications that are reported by xStatus SystemUnit Notifications
Text/Type.
Requires user role: ADMIN
USAGE:
xCommand SystemUnit Notifications RemoveAll
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand xCommand

xCommand SystemUnit OptionKey Add

Add an option key to support additional features.
Requires user role: ADMIN
USAGE:
xCommand SystemUnit OptionKey Add Key: "Key"
where
Key
: String (16, 24)
The key you have received for the option you wish to switch on.

xCommand SystemUnit OptionKey List

List all option keys.
Requires user role: ADMIN
USAGE:
xCommand SystemUnit OptionKey List

xCommand SystemUnit OptionKey Remove

Remove a specified option key.
Requires user role: ADMIN
USAGE:
xCommand SystemUnit OptionKey Remove Type:
where
Type
: RemoteMonitoring
125
API Reference Guide
xStatus Appendices
Type
Copyright © 2017 Cisco Systems, Inc. All rights reserved.