Installing The Eye Guard; Installing The Side Cover And Rear Cover - Brother BAS-311H Instruction Manual

3. INSTALLATION

3-12. Installing the eye guard

Attach all safety devices before using the sewing machine.
If the machine is used without these devices attached, injury may result.

3-13. Installing the side cover and rear cover

19
CAUTION
3048B
3049B
3050B
BAS-311H
(1) Bolt (loosen)
(2) Eye guard (tilt forward)
(3) Eye guard assembly
(4) Plain washers [2 pcs.]
(5) Bolts [2 pcs.]
After installing the eye guard assembly
(3), return the eye guard (2) to its original
angle, and then tighten the screw (1) to
secure it in place.
(1) Side cover
(2) Screws [4 pcs.]
(3) Rear cover
(4) Screws [4 pcs.]
NOTE:
Be careful not to clamp the cords when
installing the side cover and the rear
cover.