Submenu » Sensor - Dräger Polytron 7000 Instructions For Use Manual

The menu » Information «
— A list of all possible modules is displayed. The installed modules are indi-
cated by a » «. Modules which are not installed are marked with a
» «.
Use the » « and »

» « key to display more detailed information.
OK
Submenu » Sensor «
The submenu » Sensor « contains the functions for interrogating the sensor
status.
Sensor vitality
This function is active only if the Polytron 7000 transmitter is equipped with
the sensor diagnostic dongle, see page 30.
— This function displays the remaining sensitivity of the sensor.
Select the menu items » Information «, » Sensor « and » Vitality « in this or-

der, pressing the »
OK
— The current Sensor Vitality is displayed.
— Dräger Safety recommends that the sensor is exchange when the Sensor
Vitality value is less than 25.
Last calibration date
— This function displays the date of the last calibration.
Select the menu items » Information «, » Sensor « and » Last cal. date « in

this order, pressing the »
— The date of the last calibration is displayed.
Next calibration date
— This function displays the date on which calibration is next due.
Select the menu items » Information «, » Sensor « and » Next cal. date « in

this order, pressing the »
— The date on which the sensor is next due for calibration is displayed.
Sensor temperature
— This function displays the current sensor temperature and the maximum
sensor temperature which has been recorded.
Select the menu items » Information «, » Sensor « and » Show

sensortemp. « in this order, pressing the »
— The current sensor temperature and the maximum sensor temperature
which has been recorded are displayed.
56
« keys to select individual modules and press the
M
« key after each selection.
« key after each selection.
OK
« key after each selection.
OK
« key after each selection.
OK