Intended Use
®
Dräger Polytron
7000 Transmitter for electrochemical sensors
— For stationary, continuous monitoring of gas concentrations in ambient air, with built-in DrägerSensor
— Automatic configuration of transmitter to suit the built-in DrägerSensor.
— The measuring range may be selected, but it is dependent on the sensor installed.
— With 4 to 20 mA interface, LON communication, Foundation Fieldbus or PROFIBUS PA.
— For installation alternatively in Ex areas zone 0, 1, 2 corresponding to device category 1G, 2G, 3G or Class I,
Class II, Div. 1 & 2 hazardous area.
For further details, see the installation notes.
— Optionally compatible with HART
— Optionally available with pump module for the continuous supply of the gas/air mixture to be tested to the transmitter.
No explosion protection. Explosion hazard!
_______________
® Polytron is a registered trademark of Dräger.
DrägerSensor is a registered trademark of Dräger.
HART is a registered trademark of HCF, Austin, Texas, USA
®
for connection to a suitable control unit.
CAUTION
Intended Use
®
.
5