Dräger Polytron 7000 Instructions For Use Manual page 8

Design
Daisy-chain kit
For the connection of several Dräger Polytron 7000 transmitters to one bus
line (multidrop installation). This option does not affect the explosion-protec-
tion approval of the transmitter.
Duct extension
For mounting the Polytron 7000 transmitters on a duct.
Used to measure the gas concentration in the duct. This option does not affect
the explosion-protection approval of the transmitter.
Remote sensor
For installation of the sensor at a distance of up to 30 m away from the Dräger
Polytron 7000 transmitter. This option does not affect the explosion-protection
approval of the transmitter.
Duct adapter for remote sensor
For mounting a remote sensor on a duct for measuring the gas concentration
in the duct. This option does not affect the explosion-protection approval of
the transmitter.
Dräger Polytron 7000 software dongles
For activation of additional functions of the Dräger Polytron 7000. This option
does not affect the explosion-protection approval of the transmitter.
8