Submenu » Datalogger - Dräger Polytron 7000 Instructions For Use Manual

Use the » « and »

val (in days) and press the »
To confirm the entered calibration interval:
Select » Confirm « and press the »

Submenu » Datalogger «
The submenu » Datalogger « permits various settings to be made for the
Datalogger and the Eventlogger.
These functions are available only if the Polytron 7000 transmitter is equipped
with the Data Dongle 83 17 618, see page 30.
The contents of the Datalogger or Eventlogger can be evaluated only with the
PC software GasVision (Version 5.5 or higher). The contents of the Datalog-
ger for the previous 15 minutes can be viewed with the menu sequence
» Information «, » Datalogger « and » Show graph «, page 57.
Datalogger:
The Datalogger saves the measured values in accordance with the configura-
tion set under » Set Datalogger «. The Datalogger can save at least 3000
measured values. If the data is saved at intervals of one minute, this is suffi-
cient for a monitoring period of 50 hours. The monitoring period can be
extended considerably by using the setting » Trigger « (page 80).
Eventlogger:
The Eventlogger saves unit and sensor events (such as: A1 threshold value
exceeded; flow fault in pump). The Eventlogger can save a maximum of 100
events
Logger on/off
— This function is used to enable or disable the Data- or Eventlogger.
Select the menu items » Settings «, » Datalogger « and » Datalgr. On/off «

in this order, pressing the »
Select » Enable « or » Disable « and press the »

Datalogger setting
This group contains the setting functions for the Datalogger.
– Sample time
— This function can be used to set the sample time for the Datalogger.
Select the menu items » Settings «, » Datalogger «, » Set Datalogger «

and » Sample time « in this order, pressing the »
tion.
Select the desired sample time from the list and press the »

activate it (» «).
« keys to set each position of the calibration inter-
M
« key to confirm the setting.
OK
« key.
OK
« key after each selection.
OK
« key to activate.
OK
« key after each selec-
OK
« key to
OK
The menu » Settings «
79