Dräger Polytron 7000 Instructions For Use Manual page 41

Example of info mode:
Screen 1
Instrument information
Line 1 – Date and time
Line 2 – Software version
Line 3 – Unit Part No.
Line 4 – Unit Serial No.
Line 5 – Unit code
Screen 2
Sensor information:
Line 1 – Sensor name
Line 2 – Sensor Part No.
Line 3 – Sensor Serial No.
Line 4 – EEPROM type
Line 5 – EEPROM version
Screen 3
Sensor configuration:
Line 1 – Gas name
Line 2 – Measuring range (can not be change) and unit of measurement
Line 3 – Measuring range for the analogue interface.
Displayed only, if the analogue interface card is installed
Line 4 – A1 alarm threshold and unit of measurement
Line 5 – A2 alarm threshold and unit of measurement
2)
Screen 4
Pump Infos:
Line 1 – Pump flow
Line 2 – Threshold error
Line 3 – Threshold warning
Line 4 – Pump run time
1) Displayed only if a relay module is fitted!
2) Displayed only if a pump module is fitted!
1)
1)
07.11.2011 12:34
SW Version : 8.0
Part No. : 8317778
Serial No. : ARUA0001
DeviceCode: 00006317
1/4
Instrument Info
Sensorname: O
2
Part No. : 6809630
Serial No. : XXXXXXX
EEPROM Typ : 1
EEPROM Vers.: 1
2/4
Sensor Info
Gasname : O
2
Range : 25.00 Vo
4–20 SP : 25.00 Vo
Alarm A1 : 19.00 Vo
Alarm A2 : 23.00 Vo
3/4
Sensor Config.
Power : XXX %
Fault : X.X l/min
Warning : X.X l/min
Op.time : XXXX h
4/4
Pump info
Start-up
41