Dräger Polytron 7000 Instructions For Use Manual page 68

The menu » Settings «
Time format
— This function is used to set the display format for the date and/or time.
Select the menu items « Settings «, « Instrument « and « Time format « in

this order, pressing the »
Select the desired input line (Date format or Time format) and press the

» « key to switch to edit mode.
OK
Use the » « and »

US) and press the »
Language
— This function is used to set the language for the menus.
Select the menu items « Settings «, « Instrument « and « Language « in

this order, pressing the »
Select the desired language from the list and press the »

vate.
Function key
— This function is used to set the function which is to be activated when the
function key (the »
Default setting: Fault report.
Select the menu items » Settings «, » Instrument « and » Function key « in

this order, pressing the »
Select the desired function and press the »

corresponding to the selected function appear on the right side of the dis-
play. Possible selections:
Show graph– the measured values are displayed on a time axis,
see page 57
Fault report – existing faults are displayed in clear text, see page 55
Notice – existing warnings are displayed in clear text, see
report page 55
Fault codes – existing fault codes are displayed in a numerical table,
see page 55
— In measuring mode, briefly pressing the »
selected function.
68
« key after each selection.
OK
« keys to select the desired format (European or
M
« key to confirm the setting.
OK
« key after each selection.
OK
« key) is pressed briefly.
« key after each selection.
OK
OK
« key will now activate the
« key to acti-
OK
« key to activate. An icon