Mounting the Device-fixing Cage Nuts
About this task
After you have marked the location of these cage nuts on the front-facing posts, you can mount them
into the rack. Insert each cage nut on each of the posts where you have placed marks on the rack.
Procedure
1. Rotate the bottom cage nut so that its wings are on the top and bottom sides of the cage nut.
2. Compress the wings. From the back side of the post, insert first the wide wing, then the
Mounting the Scopia TIP Gateway onto the Shelf
About this task
After you have inserted the cage nuts onto the posts, you can mount the device onto the rack. Before
mounting the device, read the Safety Guidelines described in the Safety Guide. Secure the device on the
rack's posts to prevent it from moving around or falling.
Caution:
The device is heavy and we recommend that you ask someone to help you lift it.
Procedure
1. Lift the device.
2. Slide the device onto the shelf until the holes on the device's brackets align with the cage
Deployment Guide for Scopia TIP Gateway Version 8.2
See
Figure 11: Marking the location of the device-fixing cage nut on the rack
narrow wing into the marked square hole. Release the wings after the nut is in position.
nuts you mounted previously. See
on page 24.
Figure 13: Sliding the Scopia TIP Gateway onto the shelf
Setting up the Scopia TIP Gateway | 23
on page 22.