Table of Contents
Advertisement
Important:
Before proceeding with the installation, verify that all of the ordered parts are present and in good
condition. Keep a record of the parts and serial numbers. If any parts are missing or damaged, contact
your sales representative.
Verifying Rack Suitability
There are some critical requirements that you must meet when choosing a rack and before mounting the
device into it.
Navigation
•
Choosing the Type of Rack
•
Making Space for the Scopia TIP Gateway
Choosing the Type of Rack
There are many types of racks on the market. The installation instructions in this guide are intended for a
19" rack.
• Verify that the 19" rack meets the EIA-310 standards. This standard includes precise definitions of
the shape of the holes, their size, the depth of the rack and other features. For more information on
the EIA-310 standard, see http://electronics.ihs.com/collections/eia/index.htm
• Notice that the vertical square holes on the rack posts are not spaced equally. They form a
repeating pattern of two holes close together, then one hole separate, then two holes close
together and so on. See
Making Space for the Scopia TIP Gateway
When checking for an empty space to setup the device, be aware of its physical dimensions.
Deployment Guide for Scopia TIP Gateway Version 8.2
on page 15
on page 15
Figure 4: Hole distribution on 19" rack
Figure 4: Hole distribution on 19" rack
on page 15.
Preparing the Scopia TIP Gateway Setup | 15
Advertisement
Table of Contents
