RADVision Scopia TIP Gateway Deployment Manual page 24

Figure 13: Sliding the Scopia TIP Gateway onto the shelf
3. Insert the two long rack screws provided with the product through the bracket holes into the
cage nuts in the rack. Using the Allen wrench tighten the screws to secure the device to the
front posts. See Figure 14: Securing the Scopia TIP Gateway to the rack on page 24.
Figure 14: Securing the Scopia TIP Gateway to the rack
Deployment Guide for Scopia TIP Gateway Version 8.2 Setting up the Scopia TIP Gateway | 24