RADVision Scopia TIP Gateway Deployment Manual page 58

Generating the Certificate Signing Request for Scopia
Management
About this task
This section details how to generate a certificate signing request (CSR) for Scopia Management, which
must be signed by a certificate authority (CA).
Once properly signed, the certificate would confirm the identity of Scopia Management to other
components in the network, and can also facilitate encrypted communications with those components.
Important:
Using encryption is subject to local regulation. In some countries it is restricted or limited for usage.
For more information, consult your local reseller.
Before you begin
If you have the Scopia Management redundant solution, it is important to configure redundancy before
proceeding with TLS configuration. See Administrator Guide for Scopia Management for details.
Procedure
1. Access the Scopia Management administrator portal.
2. Select Settings > Security > Certificates.
3. Enter a name used to identify this certificate in the Name field.
Deployment Guide for Scopia TIP Gateway Version 8.2
The Scopia Management Certificate page appears.
Important:
To replace the certificate that is currently installed, select New.
Figure 39: Scopia Management Certificate
Securing Your Video Network Using TLS | 58