Selecting The Mcu Presentation Resolution - RADVision Scopia TIP Gateway Deployment Manual

Selecting the MCU Presentation Resolution

About this task
Configure the MCU to allow presentation and video clips to be shared with the Cisco telepresence
components without quality loss.
Important:
The presentation video resolution must be reconfigured each time the service is changed.
Procedure
1. Access the MCU administrator interface.
2. Select the
3. Select Advanced parameters.
4. Select the Review button
5. Enter XGA as the format for video resolution, which equates to 1024x768.
6. Enter the service number in the Parameter field.
7. Select Apply.
Deployment Guide for Scopia TIP Gateway Version 8.2
icon.
next to Presentation image size.
Figure 33: Configuring the video resolution
Configuring your Scopia Solution for Interoperability with Cisco
Telepresence | 50