RADVision Scopia TIP Gateway Deployment Manual page 61

However, if the component certificates are signed by a different CA than Scopia Management's
certificate, you may need to upload more certificates to establish authenticity, as described in
Certificates for Other Devices
see Planning the Required Certificates for TLS
Before you begin
1. Ensure that you have the root certificate for the certificate authority that your organization uses. The
root certificate must be compatible with the Base-64 ASCII code.
2. Ensure that you have the signed certificate from the CA for Scopia Management (see
the Certificate Signing Request for the Scopia TIP Gateway
the CSR).
Procedure
1. Copy the CA root certificate and the CA signed certificate that confirm the identity of Scopia
2. Access the Scopia Management administrator portal.
3. Select Settings > Security > Certificates.
Deployment Guide for Scopia TIP Gateway Version 8.2
Figure 41: Typical TLS communication with a gateway
on page 68. For more information about which certificates are required,
Management into the Scopia Management server.
on page 52.
on page 63 for details on generating
Securing Your Video Network Using TLS | 61
Uploading
Generating