RADVision Scopia TIP Gateway Deployment Manual page 39

5. Configure the Scopia Gateway settings as described in
Deployment Guide for Scopia TIP Gateway Version 8.2
Scopia Gateway on page 39.
Table 6: Configuring settings for the Scopia Gateway
Field Names
Name
Secure XML Connection using
TLS
Registration Name
Meeting Type Prefix
Secure connection using HTTPS Select this setting to encrypt the communication
Figure 25: Configuring the gateway
You can modify the name that identifies the Scopia
Gateway in Scopia Management.
If required, select to use TLS and thus secure the
exchange of XML messages and commands between
the Scopia Gateway and Scopia Management.
Important:
Before selecting TLS, you must generate the Scopia
Management and Scopia Gateway certificates.
After you select that checkbox, click Test Connection.
The name of this Scopia Gateway is automatically
generated by the system.
The prefix to dial to access this gateway.
between the gateway and the Scopia Management.
Before selecting HTTPS, you must generate the Scopia
Gateway certificates.
Configuring your Scopia Solution for Interoperability with Cisco
Table 6: Configuring settings for the
Description
Telepresence | 39