RADVision Scopia TIP Gateway Deployment Manual page 78

Downgrading your Scopia TIP Gateway
If necessary, you can downgrade your network device in one of the following ways:
• To downgrade one version back after you upgraded your network device, perform the procedure in
Restoring the Previous Software Version of a Network Device
• To downgrade to a version earlier than the previous version, see
Video Device
Changing the IP Address of your Gateway
About this task
You may need to change the IP address of your gateway when it is transferred to a different subnet of
your network.
Perform the procedure described in
Deployment Guide for Scopia TIP Gateway Version 8.2
Figure 56: Progress of restoring a software package
on page 74.
Configuring the Device IP Addresses
on page 76.
Upgrading the Software File of a
on page 25.
Performing Maintenance Procedures | 78