802.11B Radio Core Module - Intermec 700 Series User Manual

Syntax:
Parameters: None.
Returns: None.
700 Series Color Mobile Computer User's Manual
StartScanList()
If a scan list is configured, this will start the API looking for a network on
that scan list and configuring the radio appropriately. This call can take a
long time to process.
UINT StartScanList( );

802.11b Radio CORE Module

The 802.11b radio CORE module displays helpful information about the
802.11b radio option built into your 700 Series Computer.
Note that you can configure the 802.11b radio module from this CORE
application. Select Configure → Configure 802.11 CF from the bottom
menu bar to access the Profile Wizard application. Information about this
application starts on page 87.
Select Modules → Intermec 802.11 CF Help for more information on
the contents of this CORE module.
General
Below are descriptions and meanings for each piece of information pro-
vided via the General tab, reading from top to bottom starting on the left.
S ESS 802.11 Station:
This identifies the type of network to which you are attached, either an
ESS (Embedded Security Subsystem) Station, or Ad-hoc.
S Adapter MAC:
This identifies the MAC address for this 802.11b adapter.
S Scanning:
Status of association. When connected to a network, this changes to
"Connected to NET" with NET being the name of the network to
which you are connected.
Chapter 4 — Network Support
107