Is9Cconfig::getcode93; Is9Cconfig::setcode93; Code 93 Default Settings - Intermec 700 Series User Manual

Parameter Default
Decoding Not Active
Bar Code Length Any Bar Code Length
700 Series Color Mobile Computer User's Manual

IS9CConfig::GetCode93

This function retrieves the current settings of Code 93.
Syntax
HRESULT IS9CConfig::GetCode93( ITC_CODE93_DECODING*
peDecode, DWORD* pdwLength );
Parameters
peDecode [out]
pdwLength [out]
Return Values
HRESULT that indicates success or failure.
Remarks
None.
See Also
None.

IS9CConfig::SetCode93

This function updates the Code 93 settings with new values.
Syntax
HRESULT IS9CConfig::SetCode93( ITC_CODE93_DECODING
eDecode,DWORD dwLength );
Parameters
eDecode [in] Identifies the decoding for Code93 Symbology.
dwLength [in] Identifies the bar code length.
Return Values
HRESULT that indicates success or failure.
Remarks
None.
See Also
None.

Code 93 Default Settings

Valid Range
ITC_CODE93_DECODING
0x00`0xFE
Chapter
Pointer to the ITC_CODE93_DECODING
location to receive the decoding for Code 93
symbology.
Pointer to the DWORD location to receive a value
for bar code length.
ITC_BC_LENGTH_NO_CHANGE
6 — Scanner Support
179