Intermec 700 Series User Manual page 336

Beeper/LED
700 Series Color Mobile Computer User's Manual
To access the settings from the 700 Series Computer, tap Start → Settings
→ the System tab → the Data Collection icon to access its control panel
applet.
Use the right and left arrows to scroll to the Beeper/LED tab, then tap this
tab to access its parameters.
Most of these functions are not available when using an imager. The following
table shows which functions are supported either by an imager or by a laser
scanner.
Beeper Function
Beeper Volume
Beeper Frequency
Good Read Beeps
Good Read Beep Duration
The following are parameters for features on the 700 Series Computer.
Note that these are listed in the order of their appearance.
Appendix A — Control Panel Applets
Imager Laser Scanner
X X
X
X
X
317