Is9Cconfig2::Getcode11 - Intermec 700 Series User Manual

700 Series Color Mobile Computer User's Manual

IS9CConfig2::GetCode11

This function retrieves the current settings for Code 11.
Syntax
HRESULT GetCode11( ITC_CODE11_DECODING* peDecode,
ITC_CODE11_CHECK_DIGIT* peCheck,
ITC_CODE11_CHECK_VERIFICATION* peVer );
Parameters
peDecode [out] Pointer to ITC_CODE11_DECODING location to
receive Code 11 decoding.
peCheck [out] Pointer to ITC_CODE11_CHECK_DIGIT location
to receive the check digit option.
peVer [out] Pointer to
ITC_CODE11_CHECK_VERIFICATION location
to receive the check verification option.
Return Values
HRESULT that indicates success or failure.
Remarks
None.
See Also
None.
IS9CConfig2::SetCode11
This function updates the current setting of Code 11 symbology.
Syntax
HRESULT SetCode11( ITC_CODE11_DECODING eDecode,
ITC_CODE11_CHECK_DIGIT eCheck, ITC_CODE11_CHECK_VERIFICATION
eVer );
Parameters
eDecode [in] An enumeration that identifies decoding option for
Code 11.
eCheck [in] An enumeration that identifies the check digit option.
eVer [in] An enumeration that identifies check verification option.
Return Values
HRESULT that indicates success or failure.
Remarks
None.
See Also
None.
Chapter 6 — Scanner Support
205