Authentication - Intermec 700 Series User Manual

Appendix A — Control Panel Applets
Traps
336
To access the settings from the 700 Series Computer, tap Start → Settings
→ the System tab → the SNMP icon → the Traps tab to access its
parameters.
The following are authentication and threshold parameters for traps. Note
that these are listed in the order of their appearance within the Traps tab.

Authentication

Determines whether to send authentication traps. When trap authentica-
tion is enabled, an authentication trap is sent if an SNMP packet is re-
ceived by the master agent with an invalid community string.
Action
Tap the Authentication parameter, then select an option to change this
parameter setting.
SNMP OID
1.3.6.1.4.1.1963.10.5.2.2.0
Options
1 On (default)
2 Off
700 Series Color Mobile Computer User's Manual