Intermec 700 Series User Manual page 135

Chapter 4 — Network Support
http://www.sierrawireless.com/ProductsOrdering/embedded_docs.html
http://support.intel.com/sites/support/index.htm?iid=intelhome1+support&
http://www.siemens-mobile.com/btob/CDA/presentation/ap_btob_cda_presentation_fron
tdoor/0,2950,12,FF.html
116
Note: You will need the Adobe Acrobat Reader application to view a PDF
document. Go to "http://www.adobe.com/prodindex/acrobat/readstep.html"
to install or download the latest Adobe Acrobat Reader according to
Adobe' s instructions.
Command Set for Sierra Wireless SB555
Use the AT command interface from Sierra Wireless to program the
CDMA/1xRTT SB555 radio module. Documentation for this interface is
available via the following URL. Click the "General AT command refer-
ence" link for a PDF document, which is 680 KB in size. Note that this
URL is subject to change.
Command Set for Xircom/Intel GEM350X
Use the GEM350X AT command list from Intel Corporation to program
the GPRS/GSM GEM350X radio module. The "GEM350X Programmer' s
Reference" is available either from Intermec Technologies or from Intel
Corporation. Contact either your Intermec representative or the Intel Cor-
poration support personnel at the following URL for more information.
Note that this URL is subject to change.
Command Set for Siemens MC45
Use the MC45 AT command interface from Siemens AG to program the
GPRS/GSM MC45 radio module. The "MC45 Siemens Cellular Engine
AT Command Set" is available either from Intermec Technologies or from
Siemens AG. Contact either your Intermec representative or the Siemens
AG support personnel at the following URL for more information. Note
that this URL is subject to change.
700 Series Color Mobile Computer User's Manual