Intermec 700 Series User Manual page 132

700 Series Color Mobile Computer User's Manual
Details
Below are descriptions and meanings for each piece of information pro-
vided via the Details tab, reading from top to bottom. Most of this is simi-
lar to what is shown under the General tab. The information applies to both
the GSM/GPRS and the CDMA/1xRTT radio modules unless otherwise indi-
cated.
S Serial Status:
This indicates whether serial communications passed ("PASS") or failed
("FAIL") in its last transaction. A status of "FAIL" typically indicates
that the 700 Series Computer is unable to establish communication
with the radio module installed within.
S Manufacturer:
This lists the name of the manufacturer that developed this radio mod-
ule, such as "Xircom, an Intel Corporation," "Siemens," or "Sierra Wire-
less."
S Model:
This identifies the product name for this radio module, such as
"SB555," "GEM350X," or "MC45."
S IMEI # (GSM/GPRS):
This is the IMEI (International Mobile station Equipment Identity) se-
rial number of the GSM/GPRS radio module.
S RSSI:
This displays the RSSI frequency or lists "Unavailable" if there is no sig-
nal or the signal cannot be retrieved from the radio module.
S Operator:
This lists the name of the service providing the network support.
S SIM Status (GSM/GPRS MC45):
Identifies whether a Subscriber Identity Module (SIM) card is installed
in this 700 Series Computer.
Chapter 4 — Network Support
113